Description
EVP Sample Recorder with Variable Speed Playback and Reverb
EVP Sample Recorder with Variable Speed Playback and Reverb Hand Built By Infraready Ghost Hunting Equipment Store.
Now with added Volume and Reverb Controls.
This portable battery-operated EVP device records up to 10 second samples that can be played back at normal speed and also adjusted to play back slower or faster directly from the device, on location, without the need for a laptop or audio editing software such as Audacity.
Following some amazing feedback and results from the Haunted Guy and Haunted Live Team, we have enhanced the original MK1 prototype build by refining the design of the Recorder and adding a 3.5mm Mic input that allows a microphone of your own choice to be used in conjunction with the device.
A T-Mic is included with the sampler, but the 3.5mm socket allows great freedom of use with any mic having a 3.5mm male plug. We stock various mics, including pre-amplified, X-ray and Raudive Germanium Diode options.
A 3.5mm male to male cable (not supplied) can also be used to play in samples captured on EVP recorders or Smartphones that are equipped with a standard 3.5mm output. This allows you to edit the playback speed of such samples on the fly while out on investigation.
The EVP Sample Recorder with Variable Speed Playback and Reverb also has a 3.5mm audio output allowing any captured samples, or edited samples, to be exported to an EVP recorder or PC for permanent storage, sharing online or to social media or for further interrogation.
Compared to the earlier models of this device we continue to build; the EVP Sample Recorder with Variable Speed Playback and Reverb has the addition of an independent amplifier circuit to further boost the volume of recorded samples and the ability to add reverb during playback.
A short movie demonstrating the device can be viewed below…
What is an EVP Recorder Used For?
Electronic voice phenomena, or EVP is a technique used in Paranormal Investigation to record voices and sound from an unknown source. There are several approaches that can be used, the most basic of which is to use an EVP recorder during your investigations.
While using the EVP Recorder, try asking questions so that you can review the response that follows during playback. Holding simple conversations between Investigators is also a good way to stimulate EVP voices. Leaving the EVP recorder in an empty locked off room is another technique often used within the Paranormal field.
How to use the device….
Remove the battery cover from the rear of the device and insert 4 x AA batteries the start by thinking of a short question, for example “Can any spirits make themselves known”. While pressing and holding the record button, announce your question clearly and then continue to hold the record button until the record light extinguishes. The playback button can then be pressed to listed to the sampled EVP recording. Listed carefully following the question that you asked for any responses. The speed / pitch of the sample can be adjusted to a slower or faster rate by turning the potentiometer knob on the exterior of the recorder. Again, once the speed has been adjusted to the desired rate then listen back to the EVP sample carefully.
Before recording your next sample, the potentiometer should be set back to the mid-way position.
Please note, as hand build customised devices, the layout and appearance may vary from the images shown. In all cases the functionality will be as described or as we are constantly seeking to improve our designs it may well be of a higher spec / standard.
Reviews
There are no reviews yet